Infiltrator Systems’ TW-Series Septic tanks offer a revolutionary improvement in plastic septic tank design, offering exceptional strength in comparison to concrete tanks. These tanks provide superior strength for long-term, water-tight performance. Innovative features not found in any other septic tank include: thick, triple wall design manufactured with proprietary state-of-the-art rotomolding technology; permanent, factory-installed structural bulkheads; and reinforced access ports. No special installation, backfill or water filling procedures are required.

Other Unique Benefits Include:

• Triple wall provides a thick composite wall structure that acts like a structural I-beam.
• Bulkheads offer superior structural stability under heavy loads
• Reinforced access ports do not distort upon backfilling or during pump-outs
• Can be pumped dry during pump-outs (no need to refill with water)
• Resistant to floatation in high water table conditions
• Can be installed with 6 to 48 inches of cover
• Available as single or dual compartment tanks
• Suitable for use as septic and pump tanks
• Flat bottom allow for easy storage and installation

The TW-Series Septic Tanks are available in five different sizes:
TW-375, TW-900, TW-1050, TW-1250, and TW-1500

Downloads:

Tank Specification Sheet (pdf)
Tank Installation Instructions (pdf)
Riser Connection Guidance (pdf)

 
 

F R A L O S e p t i c Ta n k s b y R O T H

Setting the standard for all other septic tanks, the FRALO tank by Roth offers undisputed best-in-class status and the highest brand recognition of any tank in the market.

• First-generation blow-molded septic tank
• IAPMO and CSA certified (selected models only)
• High brand recognition

Less Worries

• No cracking
• No corrosion
• Water-tight
• Higher life expectancy
• Strongest poly tank on the market
• HDPE-the most chemically-resistant material in the world
• True structural integrity
• Quality of tanks are above European standards

Easier Handling

• Lightweight
• Simple, user-friendly installation
• No water backfill required
• Multi-port inlet/outlet
• Versatile - suitable for septic and pump applications
• Roth offers all accessories to complete a whole system, including the popular STAR® riser systems (left)

 
 

Fiberglass Septic Tanks

General Information:

  • Sizes in stock range from 750 gallons to 1,500 gallons
  • Non-corrosive for long life
  • Lightweight for easy installation
 
 
SEPTIC TANKS BRUISER TANKS

The world’s leading manufacturer of polyethylene tanks, Norwesco has been producing polyethylene septic tanks since 1980. With that kind of experience, Norwesco offers you proven products that you can count on for years of dependable, trouble-free service.

For septic system replacement and new home construction, Norwesco‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any Norwesco septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule.

All Norwesco septic tanks are manufactured by means of the rotational molding process, which produces a one-piece, seamless, watertight tank. Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so Norwesco septic tanks will not rust or corrode and require no additional coatings as other tanks do. Norwesco’s strict quality guidelines ensure an environmentally safe septic tank.

Underground Tank Installation Instructions

SEPTIC TANKS
Gallon
Capacity
Length Width Overall
Height
Height
to
Inlet
Height
to
Outlet
Manhole
Diameter
1000 102" 60" 63" 51" 48" 2-20"
1250 116" 55" 70" 59" 56" 2-20"
1500 135" 55" 70" 59" 56" 2-20"

The Bruiser is ONE TOUGH TANK! It can be used as a septic tank, a holding tank, a pump chamber or as a cistern tank for potable water.

  • Use native soils for backfill
  • No water needed during backfilling
  • Pre-plumbed according to state code
  • Accepts 4" effluent filters

PRE-PLUMBED: Norwesco Bruiser tanks are shipped to you ready for installation. Our pre-plumbed tanks include tee assemblies installed at the inlet and outlet. Tees are sized/cut according to each state code so the tank that you receive will be ready for installation.

WATERTIGHT LID: Bruiser tanks are furnished with a watertight domed lid. This improved design is significantly stronger than other lid designs. When leaving our factory, the lid is attached to the tank with stainless steel screws and comes standard with a foamed, polyethylene gasket between the lid and the tank. The gasket provides a watertight seal at the lid area.

Underground Tank Installation Instructions

BRUISER TANKS
Gallon
Capacity
Length Width Overall
Height
Height
to
Inlet
Height
to
Outlet
Manhole
Diameter
1000 102" 60" 63" 51" 48" 2-20"
1250 116" 55" 70" 59" 56" 2-20"
1500 135" 55" 70" 59" 56" 2-20"

* Page content has been taken directly from supplier websites. Temecula Valley Pipe & Supply is not responsible for incorrect information and/or incorrect product specifications.


Copyright © 2009 - 2012 Temecula Valley Pipe & Supply 28074 Del Rio Road. Temecula, CA 92590 - Tel. (951) 676-5678